Rivas User

Double Glazing Lock Repairs

Having quality locks on your windows and doors helps to prevent burglars from getting into your home. They aren't likely to break glass or try to get through windows that are open.

Certain double glazing owners however, have had issues with their door or window lock after installing. Fortunately, these issues are usually fixable and don't require to buy new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window or door lock if it is damaged or is not working properly. They can repair hinges, striker plates, and locks for double glazing. They can also adjust the cylinder's position to fix any misalignment problems which could cause your handle to not work correctly.

If the key fits inside the lock, but it doesn't turn or is difficult to insert the mechanism might be stuck. Dirt or grease can get stuck in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate it. Make use of a dry lubricant, such as graphite or teflon, not oil, because oil can attract dirt and cause it to stick to the inside of the mechanism. After you have lubricated the lock, you must insert the key and attempt to turn it. The lubricant needs to be absorbed into the mechanism and the lock should turn effortlessly.

The loose screws inside the lock mechanism are a different reason for a broken lock. They can loosen and fall out, or even break completely, preventing the lock from being able to perform as it should. These screws can be tightened by using the help of a screwdriver. However, be cautious not to tighten them too much. This could damage the internal components.

A broken lock can be dangerous for you and your family members, particularly if you have young children. They can easily unlock the door without your knowledge and gain access to your home. If you're worried that this might occur, a professional locksmith can help secure the double-glazed doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair all types of faulty and broken mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also modify the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always necessary.

Handles that are broken or faulty

As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is a great option for those worried about opportunistic thieves looking to gain access to your home. It is also a good idea to ask your installer about anti-lift locks that can be installed with the locks that are already in place to ensure that your window is locked in a closed position.

It's not uncommon for handle locks to get damaged or even fail - they are the first part of your window that will be forced open by a criminal intent on breaking into. Fortunately, the good news is that this is one of the easiest parts to repair.

Modern uPVC handles and aluminium handles come with the multi-point locking mechanism referred to as Espagnolette which is designed to ward off forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installations. Older style uPVC and aluminum handles can be upgraded to lock bolts that shoot and again as an additional extra on new double glazed window installations.

If a handle is damaged, it's important to get this repaired as soon as is possible. Faulty handles may prevent the window from closing properly and allow drafts to get in. It could also be a vulnerability that thieves can take advantage of and put the belongings of your family and your own at risk.

To repair the broken mechanism, you first need to gain access to the window frame and remove the broken handle. The gearbox is then accessed to identify the type of gearbox that is used to open the handle. This will allow a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism has been replaced the handle can then be re-attached with the original screws - however, we generally recommend replacing them with larger ones because this will ensure a more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further corrosion. After you've completed this step, your window should be fully functional again at a fraction of the cost of replacing it.

Hinges that are Broken or damaged

If your windows do not shut properly, you could be experiencing draughts, an affliction of your home's security and a higher risk of water or damp damage. Window hinges that break or fail are a common problem and can be fixed easily.

If you have a window made of uPVC that won't close or open it's likely that the hinges are broken or damaged and require replacement. While most window manufacturers require you to purchase a new window unit in order to solve this issue, we're able to replace the damaged hinges and save you money.

Window hinges can often break from repeated use or they might be damaged through rust over time. If you have a broken window hinge, it's crucial to take the necessary precautions to avoid further damage. This means not causing the window to close or open.


Knowing the type of hinge you have will help you identify the correct parts to fix it. Maco, Mila and Roto are all window hinges. It is recommended to consult an expert in this regard so that you don't make the mistake of buying parts that aren't compatible with your existing hardware and could cause further damage.

Faulty hinges are a major problem for uPVC doors and windows. They can be the main source of noise and can also allow water to enter your windows.

Make Double Glazing Window And Door Parts basingstoke whether the pin barrels on both sides of the hinge are aligned. If not then tap the head pin using an hammer to create an arc in the barrel of the hinge. This will help keep the pin in place. Have a person hold the doors while you remove hinge screws and hinges. Replace the hinges and then install screws using glue. Finally, while the glue is drying, secure the hinges by using weights or clamps.

Once the hinges have been fixed after which you will be able to re-install the door and re-attach the handle. It is a good idea to replace the screws using the same length of wood dowels as the original screw, so that they are in line with each other.

Glass that is broken or Faulty

uPVC Windows can be damaged over time, even though they are excellent at keeping out the cold and conserving the heat. This could include damaged or broken glass and defective locks. This is an issue that can be costly should it be left unattended. It can also hurt the aesthetics of your home and cause a loss of insulation. It is essential to repair any damage promptly.

If the glass is cracked but not shattered, you can usually fix it yourself with the proper tools and techniques. Be sure that the area around the broken glass is free of debris so that any shards do not cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in a proper way. Then, put masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. Pre-fitting the glass pane before gluing it in place is an ideal option when you have a window that has two panes. This will ensure you have enough space to finish your project.

Before applying the glue, clean the surface of the damaged frame and the glass with an unclean, dry cloth. Follow the application and curing instructions, which may vary from one product to the next. You may need to clamp the glass that has cracked using clamps that are lightweight and designed to support fragile materials, depending on the angle.

After the adhesive has set, carefully place the glass in the window frame. Make sure it's in line with the frame edge and that there aren't any gaps between the glass sash and frame. Be careful not to bend the window as it's being installed, as this could weaken the seal and lead to water infiltration and condensation.

Contact a professional glazier like O'Brien(r), to arrange an appointment to replace your glass if the window has been completely broken. Unattended handling of broken glass can cause danger to pet and children It's therefore essential to act swiftly.

Member since: Wednesday, December 4, 2024

Website: https://www.repairmywindowsanddoors.co.uk/basingstoke-double-glazing-repairs-near-me/