Feldman User

Replace Lock in UPVC Door

If you've got a upvc door lock that isn't working properly, you must call a professional locksmith. They are quick, efficient and complete the task to a high standard.

It's not difficult to change the bar lock made of upvc. You just need to know what is involved and follow the steps below.

Removing the Barrel Lock

Upvc windows and doors are commonplace in a variety of properties. They allow natural light to be able to enter the home and can be opened easily with the correct key. Changing the lock barrel on an uPVC door is a straightforward task that can be completed in just five minutes. It is a quick fix if you have lost your key, or if a tenant has left and has not returned it, or the lock barrel is damaged.

You will need to remove the screws that hold the handles first. This is to remove the handles out of the way to allow you to access the barrel screw that locks them. It is important not to loosen the screws too quickly, as this can damage the handles.

After the screws have been removed, locate the screw that holds the lock in position on the inside of your door. This screw is different in color from the other screws on your door and sticks out. Using the Phillips screwdriver, take out this screw. Then, take the current key used to lock the lock and place it in the barrel. Turn it to the right as far as you can. This will open the barrel which makes it easier to take off the door.

Once you have loosen the screw it's time to break the support pins that hold the euro cylinder in the position. To accomplish this, you'll require strong pliers or mole grips. Take the protruding portion of the euro cylinder, and bend it from side to side, and then up and down. This will break the two pins holding it in place.

Once the old cylinder has been taken out, you can then begin the process of putting in the new one. To ensure that RepairMyWindowsAndDoors get the right replacement, you need to first measure the lock cylinder. You can do this by measuring the distance between the center of the circular keyhole and the center of square spindle. The measurement must be taken from the upper hole of the spindle.

Modifying the Cylinder

The primary locking mechanism is the euro cylinder. They are simple to replace and don't need a locksmith or handyman service. If your lock isn't antisnap or antibump, it should be changed to one with this security included. They are incredibly inexpensive and will save you money and inconvenience when your locks are affected by these security threats.

Open the door and stand in front of it. This allows you to reach the screw that holds the handle by hand or with an appropriate tool. Loosen this a little or maybe one quarter turn to get the job started.

After this is completed the cylinder will come out easily as it is no longer held in by the screw. Next, you'll need to determine the size of replacement cylinder you require. There are approximately 25 sizes available. You should bring your old cylinder when you buy the new one to ensure it is the right size.

If you're not sure about the dimensions, measure from the screw hole center to the end of cylinder. You can only be sure that you're buying the correct sized cylinders for your upvc door by measuring from the center of the screw hole to the end of the cylinder.

Insert the new cylinder into your door in the opposite direction you removed the old one. The alignment of the lock cam can be a challenge, but it is generally an issue of alignment.

You will now need to screw the long securing screw back into its place. After that, you are able to check that the cylinder is securely inside the door. If you're satisfied that it is, you can reconnect the handle and close the door for another test. If everything is fine, your cylinder lock in your upvc door has been changed and you should have added another layer of security to your home.

Changing the Handle

There are many reasons the door knob or handle may become loose. It could be due to the wear and tear on the handle or the square spindle within the handle. In this case the door handle will need to be replaced.

It is important that the door is propped open so it cannot close between taking off the handle and replacing it. Remove the screws from the inside surface of the plate with a screwdriver. This will release your handle from the plate. Don't lose the screws, as you may need to re-screw them later.

It is now possible to remove the handles to access the cylinder lock within the door. It will be a round or bulb-shaped cylinder that is only found in multi-point locks on upvc doors and some doors made of aluminium. It is like changing the handle, except that you'll need to remove the old cylinder off the door and replace it with a brand new one.

It is essential to take into consideration the dimensions of the replacement handle when choosing one. The handle should be of the same size as the original, since it will need to be able to fit the existing screws holding the handle in place. You can start by consulting the size table which lists the most commonly used sizes of replacement handle plates and their keyhole centers.

Consider changing your handles for your upvc doors to a more secure standard such as a Sold Secure SS301 set or 2* Kitemark security handles. This will enhance the security of your home and make it easier to operate your door. The cost of these sets will be a little more expensive, but the security and peace of mind security is worth it. Having to constantly push the handle of the door upwards and downwards to shut or open it is not something you want to be doing.

Change the Lock


The lock on your uPVC can be a weak point for burglars. You may want to upgrade your uPVC door to a multipoint lock in order to ensure it is secure. This would include a deadbolt and an open hook to block criminals. A professional locksmith can assist you with this, however it is also possible to complete the work yourself. The process is fast and simple. You'll only require just a few tools.

The first step is loosening the screws that hold in the handle. Using a screwdriver, you can remove the screws and put them in a secure place. You can then raise the handle and expose the screw that is holding the cylinder in position. You can unscrew this screw and replace it an alternative. Make sure the screw is of the same size as the one you used before. It must be aligned correctly with the barrel of lock.

Making changes to the lock on your uPVC door can seem intimidating. You rely on it to protect your home, and a mistake could leave you without a way to unlock the door. If you are aware of how to do it, the process is fairly easy and is much less expensive than hiring a locksmith.

You will need to remove the faceplate on the inside of the lock in order to change the lock. You will need to be able to see the screw on the inside of the door, as well as the retaining bolt on the outside of the door. Once you've got access to these screws, you can remove the faceplate and replace the cylindrical.

You might need to alter the lock on your uPVC door for a variety of reasons. You may need to change the lock on your uPVC door due to many reasons.

A change in a uPVC locking mechanism can be accomplished by anyone with basic DIY skills. If the lock is stuck, you'll have to examine the hinges inside the mechanism. If the hinges have been lubricated, it is a simple repair. If you're not sure, it is best to consult an expert.

Member since: Friday, September 20, 2024

Website: https://www.repairmywindowsanddoors.co.uk/birmingham-window-lock-repairs-near-me/