Nyborg User

UPVC Door Lock Replacement

UPVC doors are an excellent protection against burglaries. However they have a few limitations that can be overcome by installing a deadlock.

It's time to change the barrel lock if you feel that your uPVC door lock is loose. This simple DIY project can improve the security of your home and improve its appearance.

Take out the lock cylinder from the old lock.

If you're experiencing that your front door feels fragile when you lock it, or your key struggles to turn, you may have a damaged lock cylinder. Replacing it will ensure smooth operation and improve security. The process is easy and should take about 30 minutes. The only tool you'll require is an screwdriver. Open your door and check the edge of the door close to the lock cylinder. You should see a screw there that is roughly in line with the bottom of the cylinder. Remove it using the help of a screwdriver, and store it in a safe place.

You'll need to know the exact size of the cylinder you have to locate the right replacement. The sizes typically range between 60mm and 110mm. To determine the size of the lock, you will have remove the screw from the faceplate. You can also try to turn the lock handle with the key while the cylinder is still in place to determine how much it shifts in each position.

Next, you'll need to measure the cylinder diameter and length of the cylinder cam. These measurements are essential for ensuring that your new lock will fit the existing door. The dimensions may differ based on the type of uPVC. You'll need to choose an alternative that is similar or slightly bigger than the existing cylinder.

Once you've got your measurements, it's time to remove the old door cylinder. It's a simple task however, you must do it correctly to avoid damaging your door or frame. Make sure that the door is properly propped up or secured so that it won't shut between steps.

If you don't wish to tackle it yourself, hiring a professional locksmith is a good alternative. They can provide expert advice, perfect execution and peace of mind. They can also assist you in selecting a secure and secure lock system. DIY can be a good option to save money as well as gain new skills. You only need a little patience and the right tools like a Phillips Screwdriver. The process of changing your uPVC lock isn't as intimidating as it appears.

Installing the new lock cylinder

It is crucial to follow the correct steps and make sure you use the correct measurements when replacing locks at your front door. This will not only help you avoid problems in the future but will keep your home safe and permit you to use a key on both sides of the door. Before replacing your uPVC lock, you must take measurements of the overall length and of the backset and the cylinder's diameter. These measurements will ensure that the lock cylinder can fit inside the uPVC and function properly without any gaps.

The first step in the process is to remove the door handle by loosening the screws that hold it with a screwdriver. The next step is to take off the barrel screw that holds the cylinder lock. You can then take out the lock you have previously used by inserting the key into the cylinder, and turning it left and right. If the key is in either of these positions, you should be able to take off the cylinder by wriggling it out of its slot.

Installing the new cylinder on the front door is easy. You can use the same procedure you followed to remove your old one. It is important to be aware that the new cylinder will not fit into the space left by the old cylinder. This is because the cylinder needs to be aligned correctly so that it can be closed and locked using keys. To accomplish this, you must make sure that the cylinder has an elongated keyway and is located in its slot.


Installing a new uPVC lock on your front door is not difficult, but it is important to be cautious not to damage the handles or the door frames. If you are uncertain about your ability to complete this project it is best to hire a professional locksmith who is Checkatrade approved and has previous experience working on these types of doors. A locksmith can save you money and time by completing the work quickly.

Attaching the door handle

There are a variety of reasons why you may want to change the lock on your front door. You might have lost a key, your previous tenant hasn't returned the keys or you want to upgrade to more secure locks. wellingborough door locks replacement takes just five minutes to replace the barrel on a lock of the uPVC front door. You'll need a Phillips head screwdriver, the new cylinder for the lock, and a spare key (if you plan to use one). Ensure that the door is opened or secured safely so that it doesn't close during the process.

There could be some issues when changing a uPVC front door lock mechanism, but they are not as difficult to fix as you may think. Begin by identifying the type of lock is installed on your front door, and then determine the size that you'll need to replace. For older doors there are strip locks and multipoint locks. Once you've identified the brand and type of lock on your uPVC front door, it's much easier to find a replacement that is similar.

After replacing the cylinder, you'll need reconnect the door handle to it. First, you'll need to loosen the set screw on the shaft of the handle with a screwdriver or Allen key. This will permit you to take the handle off and expose the spindle shaft. If the shaft is threaded, you'll have to loosen it a bit before reversing it with a screwdriver to ensure a proper fit.

Test the lock after you have tightened the screws and lock cylinder. Verify that the key is turning easily and is well-fitted, and the locking mechanism of the handle is functioning properly. If you're not comfortable doing this by yourself, a locksmith can do the job for you.

Remember that uPVC lock mechanisms and door handles require regular lubrication to perform as they should. This is especially relevant in areas with high wear and tear like those that are used frequently or shut and locked. A tiny amount of lubricant could be a significant step towards increasing their lifespan and making sure they work properly.

Test the new lock

A Upvc lock is an essential element in the security of your home. Like any other piece of equipment, it can wear out over time or even be damaged. Regular maintenance is essential to a functioning uPVC locking system. This will stop malfunctions from occurring and compromising the security of your home. This can be achieved by lubricating internal mechanisms each six months using a certified fluid. This will ensure that the lock is running smoothly and stop it from rusting or getting damaged.

You can use a silicon spray in addition to the regular oil to loosen the keyway. This makes it easier to insert keys. This is a simple DIY solution that will help you save money over time. It is recommended to avoid using WD-40 since it can leave a oily residue that could damage the lock.

It is important to test the new cylinder upon installation before you can be sure that it will function properly. You can test this by testing the handle both from inside and outside the door. It is now time to put the handles back in place and then re-insert the spindle screws if everything is in order. Replace all the screws that secured the handles. Give yourself a pat on your back for a good job!

A locksmith can install extra features to increase the security of your home, for example door chains or sash jammers. They can even help you choose the best locks for your home. A professional can assist you in determining what size of cylinder is best for your doors. This is crucial because a lock that is not properly matched could compromise your security.

The cost of replacing the cost of replacing a uPVC door lock may vary depending on the kind of lock you select and the number of doors that require replacement. The average cost for a professional locksmith is between PS75 and PS100 per hour. However, the price can change depending on where you live and the type of lock you require. It is also crucial to compare locksmith costs before deciding on a company.

Member since: Sunday, December 1, 2024

Website: https://www.repairmywindowsanddoors.co.uk/wellingborough-door-locks-replacement-near-me/