Lundsgaard User

Cat flaps allow your pet to move around whenever they want without you needing to let him in or out. They also prevent your cat from urinating in the house.

Installing a cat flap on a upvc door panel is much simpler than installing one in a glass door, but it does require some skills and the appropriate tools.

Take a measurement of the door

The installation of a cat flap inside the door isn't easy but if you use the correct type of cat flap make sure you take your time and follow the directions provided, it shouldn't be too difficult. We will be showing how to trace the shape, use an jigsaw for cutting out the door's area and then finish the job by attaching the cat flap to the door. This will ensure that the flap remains in place and also protects the doors from the damage caused by wind and rain.

To determine the size of the cat flap that you need, measure the width of your pet. This will enable you to choose a cat flap that is big enough for your pet to enter the home and exit without having to open the door each time.

If your kit has a drawing showing where to drill, you can place it on the door and then draw a pencil around it. If your door has sill or moulding on the bottom of it ensure that you have enough clearance from these as this will keep your cat safe and will prevent them from getting access to your home.

Put on your eye protection and dust mask. Then using a jigsaw, begin cutting along the line that you have pencilled in. Don't press the blade too hard, as this can cause it to cut faster than you would like it to. Set the square with a ruler to ensure that you're cutting the material in a proper manner and that the cut is a rectangle. When you are happy with the final result, you can take the door material off.

Draw a Line

The cat flap is a great way to allow your pet to go in and out without having to worry about them being a nuisance to guests or leaving unwanted gifts in the home. It also stops draughts and helps keep your home's temperature in check. However, fitting a cat flap in your door could be an intimidating task for those who have never done it before, which is why many to hire a professional joiner or carpenter to complete the task. While this is certainly an option, it's possible to complete the task yourself if you own the proper tools and follow instructions carefully.

This is much simpler to do on a wooden door, but it is still possible using uPVC. However you should be cautious not to scratch the doors as this could invalidate your guarantee. First, you need to take measurements of the door to make sure it will accommodate the new cat-flap. This should be easy enough for an ordinary uPVC door, however you may require more care if using an alternative kind of door, as they are more difficult to cut than solid uPVC panels.


The next step is to determine the belly height of your cat. This is the measurement from the floor to the underside of the cat's stomach and you'll need to find a place near the door that will be within the range your pet can comfortably go through. Once you know this, you will be required to mark the area with pencil and a spirit level so that you can ensure that the hole you make will be a good fit for your cat.

After you have marked the area, it's time to cut out the hole. It is crucial to be patient and use a jigsaw ensure the cuts are smooth and clean not uneven and rough. This could damage your door. back door with cat flap fitted and a dust mask when using the Jigsaw. Inhaling sawdust can be harmful for your health. After you've cut the hole, you will need sandpaper to smooth the edges so that the cat flap is easily inserted.

Cut a Hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit is quite difficult. You may be tempted to do it yourself, but unless you have plenty of expertise in DIY, it's probably best to get a professional to do the task for you. A botched job could not only look ugly, but also pose security risks. It could allow cold air in when the cat is outdoors and hot air out when inside.

Mark the hole's position on the door with the help of a pencil and a spirit level. This will ensure it is correctly positioned and is flush with the door's other parts. You should make sure you have some sandpaper on ready to smooth out any rough edges.

After the line is traced, you must cut the hole with a jigsaw, remember to wear any necessary safety gear for working with an electric tool. If you are concerned about the sound produced by the jigsaw, you can purchase an electric version that is quieter and more user-friendly to use.

It is best to only remove the material required to fit the flap. A little bit of extra material is required to increase the thickness of the the flap, but cutting off more than this can cause problems or damage the doors frame.

If the door is made of upvc and is made of metal, or has a frame, it could interfere with the microchip flap. In this situation, you will need to create an extra-large hole to ensure that the metal does not come into contact with wall of the flap.

If you are fitting the cat flap onto an upvc door or a double glazed window with a frame made of metal, you'll need to speak to a specialist who can supply you with a new pane of glass with the hole for the cat flap premade inside. It will be much cheaper to get this done rather instead of trying to install the flap to an existing pane of glass that was not designed specifically for the purpose.

Place the Flap

Cat flaps allow your pet to come and go whenever they want, allowing them the ability to unwind inside the house when they're feeling like it. However, if you own a uPVC door, it may be difficult to put in a cat flap, particularly in the absence of a glass pane that can be cut for one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to add the cat flap. It's not a simple matter of cutting an opening in the door. It is also necessary to do a few things to ensure it's secure.

A composite, uPVC, or GRP door panel is typically made up of a plastic skin that is bonded to an insulating polystyrene base. The material is fairly fragile and care must be taken when cutting through it to avoid causing damage. This kind of door typically includes a template that you can use as a reference to cut the hole into your door.

Once you have marked the position of the hole in your door, it's time to fit the cat flap itself. You can buy and fit various models, from basic button operated ones to microchip activated units that allow only your pet. But, regardless of the kind of cat flap you choose it's crucial to ensure that your cat can use the flap and not get trapped in the weather.

It's a good idea opt for a circular fitting rather than a square one, as circles can be more securely cut into door glass. This is because square holes make glass more vulnerable to cracking if a drill is used on it. It's also a much safer option as you're not putting yourself at risk by drilling into toughened glass that might break and hurt your pet or family members. This is especially crucial if you have elderly or children in your home who might be injured by glass fragments.

Member since: Monday, October 7, 2024

Website: https://www.repairmywindowsanddoors.co.uk/poole-cat-flap-installer-near-me/