menu
Daily Bits Email

Madsen User

Madsen User

How to Choose a Smart Lock For Double Glazed Door

If you're searching for an intelligent lock for double doors, you need to choose one that meets high security standards. This includes being SS312 Diamond approved or at a minimum Kitemarked to TS007 3 Star, which stops the lock from snapping.

Make sure that your doors are pre-drilled with bore holes prior to selecting a smart lock. You may need to install a hinge bolt or another additional security measure if you do not.

uPVC Door Locks

Most uPVC doors come with the euro cylinder lock that sits within the handle and connects to a multi-lock system inside the door frame. Many older or cheaper uPVC door models have standard locks for cylinders that can be easily'snapped,' rendering the multi-locking system unusable and allowing burglars to gain access to your home. A higher-quality uPVC door should use an anti-snap euro cylinder which is much more secure and impossible to alter.

Multipoint locks are a popular choice for uPVC doors because they provide more security than a single cylinder. They are usually long and have multiple locking points along the frame and door to prevent burglars from gaining access through the unlocked side.

When selecting a multipoint lock for your uPVC door, make sure that it's approved to the highest security standards. The most secure locks are ones that have been certified to SS312 Diamond, or at a minimum Kitemarked in accordance with TS007 3-Star. Both of these standards have tests to ensure that the lock is safe from snapping.

Keeping your uPVC door locks lubricated by a product like WD40 can help prolong their lifespan and stop the locking mechanism from becoming stiff or causing the handle to slack when used. This could indicate that there is a problem with the internal springs which will require replacement or an indication that you are applying too much force when locking the door since this could cause damage to the mechanism.

It is recommended that if you need to replace uPVC locks, you call a locksmith who specializes in uPVC replacement locks. They can help you decide which lock is best for your door and offer you a competitive quote. They can also repair any damaged panels or replace your handles.

A professional uPVC locksmith will usually charge between PS35 and PS50 for the replacement of your uPVC door locks. They'll provide a full service that is swift efficient, reliable and will be performed to the highest standards. They will charge extra if they need to rekey the locks or replace any windows that have been broken into.

uPVC Euro Cylinder Locks

Cylinder locks (also called door barrels) are found in uPVC doors and are connected to the multi point locking system within the door frame. They are also used in internal glazed doors as well as conservatories. These locks provide an excellent security level, but can be vulnerable to attacks such as bumping and snapping locks. This is why it's crucial to lock your uPVC doors prior to retiring to bed or leaving the property.

There are a variety of different cylinder locks available on market, and it's important to decide which one best meets your needs prior to purchasing. For instance, you should consider how often you lock your uPVC door and if you want a keyed alike system whereby all of your doors can be opened using the same key.

The most common type of cylinder lock is the euro cylinder which can be found in a lot of uPVC doors. These are usually made of brass and are available in various sizes to fit on most doors. The biggest models are typically used for the front and back door on larger properties.

When selecting a euro cylinder, it is crucial to confirm that it has been tested according to the proper kitemark standard - these are SS312 Diamond Approved, or TS 007 3 stars and offer protection against Drilling, Picking Bumping and Snapping.

Cylinder locks are available in various lengths and some have offset. This means that they are able to close from the inside after they've been closed by turning the handle up. It is also essential to think about the amount you can afford to spend on your uPVC door locks because the cost will vary depending on the level of security that you require and the features that you wish for your new cylinder to have.

When replacing a lock on a cylinder, it is essential to measure the door to ensure that the new lock will fit correctly. To accomplish this, first locate the screw fixing cylinder usually a large headed screw that runs parallel to the lower part of the cylinder, and then remove it. Then, locate the cylinder on the door and measure from the edge of the lock face to the center of the screw hole, this is your measurement A. Measure from the edge of your door to the center, including furniture. This is your measurement B. Make sure that A and B equal each other to ensure you have measured accurately.

uPVC Multipoint Locks

Multipoint locking systems are the most secure locks for uPVC and composite doors. These long strip locks are able to run the length of your door and come with numerous hooks and bolts that lock when you operate the handle. These locks provide greater security for your home and come in various designs to suit any door type or taste. uPVC multipoint locks are the type of lock you will find on the majority of brand new uPVC doors as well as most composite/timber doors.

In contrast to Euro Cylinder locks which are prone to 'lock snapping' the multipoint lock is designed to stop this kind of attack. This is due to the locking points on a multipoint system are connected with a steel bar, which keeps the rollers and hooks from dispersing without taking the key out of the cylinder.

If you're worried that your door doesn't have one, it's important to have a locksmith at your home check it out. The lock can usually be identified by opening the door and looking down the keep (the strip of metal that runs down the length of the door) for the manufacturer's logo, ERA, Avocet, Fuhr or Mila are the most popular brands.

You'll have to use a lever lever on the lock or turn the key several times to activate the locking points. This is also known as winding up the lock. Once all locking points are engaged and locked, you can utilize the handle to open and close the doors. the key locks it. This throws out the deadbolt that is located in the central gearbox.

When it comes time to replace your uPVC or composite front door lock, it's always best to purchase from an established company that specializes in doors and windows, as the locks on these products play an important part in protecting your home and family. If the security and locks of your new doors do not meet the standards required purchasing a low-cost multipoint lock could be a false economic choice. This will not only put your family at risk, but also affect your insurance premium.

uPVC Rim Locks

There are a few different kinds of uPVC rim locks. The most basic rim lock is one that is a slam-close lock. As you shut the door, it locks automatically. Learn Additional Here can also purchase one that you have to manually lock with the key before you leave the home. These locks aren't able to be opened and are among the most secure options that you can use on your door. They are suitable for timber or wooden doors in homes for domestic use and glass panel doors for commercial buildings. You can get these locks approved in accordance with the new British Standard BS3621, which means that your insurance company will offer you a reduction on your cost.


The multi-points locks that are used on uPVC and composite doors are very secure and provide the best level of security for your home. These locks have multiple locking positions to ensure that you aren't able to force the handle to turn if you try. They are designed to make it difficult for burglars to break through the handles so they can't pull the latch from outside.

These locks can be installed with mortice locks to offer extra protection against people breaking through the window. They are a good option for doors that lead into gardens and outbuildings as they offer extra protection from thieves who are able to climb through the window to gain entry.

If you are concerned about your uPVC door or composite door snapping and snapping, we can put in an anti-snaplock to prevent this. We install them on our composite doors and are the only uPVC installation company in Belvedere to offer this.

If you want your locks changed outside of hours then it is possible to do so because we have a van on the move that can visit your property. The locksmith charge for this is slightly higher than when we work during the day but it's worth the added cost for security and comfort of having your uPVC door locks changed out of hours.

Member since: Friday, September 20, 2024

Website: https://www.repairmywindowsanddoors.co.uk/ashford-window-lock-repairs-near-me/

BitsDuJour is for People who Love Software
Every day we review great Mac & PC apps, and get you discounts up to 100%
Follow Us
© Copyright 2025 BitsDuJour LLC. Code & Design. All Rights Reserved. Privacy Policy