Davis User

Choosing the Right UPVC Door Handle Replacement

It's easy to replace your handles made of upvc, but choosing the right handle can be a bit difficult. The majority of modern double-glazed handles come with spring cassettes in the handles, but older ones don't.

If your upvc handle seems loose and floppy there may be an issue with the internal parts of the multipoint lock. This article will address a variety of potential problems and their causes.

Sagging or drooping handles

uPVC handles can sustain wear and tear, especially in older properties. The most common reason that a handle becomes floppy is because of a broken spring cassette in the door lever. This is caused by a lot of force and the square spindle that holds the cassette could be dislocated or round.

The good news is that replacing the door handle made of uPVC is an easy task and can be completed in just a few minutes. The first step is removing the old handle unit. To remove it, you must unscrew the fixing screws visible on the back of the handle lever. After the handles have been removed, you can take them off and replace the cassette.

There is a wide selection of uPVC door handles to pick from online and many of them are available in various finishes. The finish you choose will determine the length of time the handle will last and how easy it is to keep clean. Finishes like PVD, Stainless Steel or Resista are designed to resist corrosion and will last for up to 25 years.

After you have selected a colour or style, you are able to choose the type of handle that you need. The most popular types are pad and lever arrangements. Lever pads feature an inside lever and an outside paddle, this is often employed as a security measure to block access by unauthorised persons.

Then, take a measurement and record the dimensions of the handle you have. You will need to measure the PZ dimension, which is the distance between the screw hole and the centre of your lever. It is also important to determine how long the handle is and the size of its keyhole. Once you have the measurements you can then compare them to the handle size matrix to determine the appropriate replacement.

Broken springs

Over time, uPVC handles can become loose or wobbly. The spring cassette could also break. The springs are used to make sure that the lever of the handle is in a horizontal position. Without them, your doors will not lock properly.

Modern uPVC handles have these cassettes incorporated directly into the back plate. These springs are often integrated into older uPVC door mechanisms. It is not something you can fix by yourself, but it's definitely worthwhile to have your locksmith take a look as this could be the reason for the sliding uPVC handles.

One of the most frequent problems with uPVC door handles is that they become loose or wobbly with time. This is typically due to worn springs that can be easily fixed. Generally the reason for this is excessive use of the handle, and because of that the square spindle inside the handle will wear out and the springs will be displaced.

To correct this you will need to open the door and remove the fixing screws located at the back of the handle plate. This can be accomplished using the Philips screwdriver and once the screws have been removed, the handle can be removed and the handle plates pulled apart carefully. Then you can take off the old springs and replace them with fresh springs.

Depending on upvc door handle replacement andover of handle you are using the distance between the two fixing screws may differ and it is crucial to know prior to buying a replacement. This measurement is called the PZ and it is essential to use a calibrated measuring tape to ensure an precise reading.

After replacing the springs you should be able to use the handle without any issues. However, it's always recommended to lubricate the mechanism inside to ensure that everything is working just as it should. This will not just ensure that your uPVC doors are as secure as they can be but also makes them more comfortable to use for a long time.

Handles that slide around

Handles that slide around could be caused by a variety of things, one of the most frequent causes is when the levers of the handle aren't aligned properly with the lock. This is a problem that can occur on uPVC doors as well as composite doors. However, it's more evident on older doors as they are constructed of lower quality materials that aren't able to stand up to the elements.

This problem can be solved by a professional, who will adjust the handles and ensure they're in line with the door lock. They'll also examine the lock to determine if anything requires fixing. In many instances, a minor adjustment to the handle springs is all it takes to resolve this issue.


Changing your uPVC door handle is easy enough, but you need to measure the measurements of the existing handles to ensure you have the correct size replacement. You'll need to take measurements of the distance between the two screws, as well as the size of the keyhole and lever, and the distance between them. Then, you can use this uPVC handle size guide to find the right replacement for your home.

After you've taken the measurements, take off the current uPVC handle. It is usually quite easy and requires a screwdriver to get to the screws on the interior of the door. Once the screws have been removed, you can then take off the handle itself and then proceed to install the new handle.

Before starting making any changes, make sure that the door is secured open with a door wedge to prevent it from closing in the middle of your work. Once the handle is removed you'll be able to inspect the underside of the door to fix the issues that are causing it to slip.

If you don't have time or nerves to tackle this task on your own, a handyman from Fantastic Services can help. They will employ specialist locksmith opening techniques to unlock the door without causing damage and will then replace the faulty handle, making sure everything is in place and working exactly as it should.

Gearbox damage

A damaged gearbox may cause the handle made of upvc to become stiff and lose its function. This could prevent the lock from being able be opened using the use of a key. This is a risk and must be addressed as quickly as is possible. It is crucial to contact an expert locksmith if you can't resolve the problem yourself. They have the equipment and knowledge to complete the task correctly.

The first step is to unhook the handle from its cover plate. You can do this with the help of a screwdriver with a flat-headed tip. After removing the handle, take out the middle screw that is holding the cylinder. Once you have removed the middle screw, you can then loosen the two screws that secure the barrel. You can then remove the barrel away from the door. To accomplish this, you'll require someone to prop the door wide.

After you have removed the cylinder from the handle you can replace it with a brand new one. It is essential to make sure that the new cylinder is of the same size as the previous one. In the event that it isn't, you could end having an unaligned handle properly. This can lead to a myriad of problems, such as leaks and draughts.

A lot of doors made of upvc have adjustable slots which can be used to adjust the handle's tension or release. These slots are usually located on the inside of doors, near the place where the handle connects with the cylinder. Allen wrenches can be used to tighten the slots for adjustment. After you have made your adjustments, you can put the handle back on and screw it in. Then, you'll be able to test the handle to make sure that it is working properly.

If the door handle made of upvc becomes loose or floppy when closed, this is usually a sign that the gearbox in the upvc has failed or the internal spring components are in the process of breaking down. This can cause your multipoint locks made from upvc to fail leaving your door open to burglars. In this scenario, the upvc gearbox must be replaced. It will cost between PS145 and PS280 including labor.

Member since: Sunday, November 24, 2024

Website: https://www.repairmywindowsanddoors.co.uk/andover-door-handle-repairs-near-me/